Breakpoint resume carving function Of the Tekai cnc company

Breakpoint continuation engraving is divided into two cases：

一：When the machining tool is damaged, you need to continue machining at the broken tool.

Please be careful not to shut down the china router cnc and Mach3 software.
Step 1）Stop the spindle of router cnc woodworking rotation and replace with a new machining tool.

 

 

Step 2）Perform tool setting on the Z axis, and re-determine the Z axis tool height.

 

  

Step 3）You need to estimate the line number where the knife is broken, (for example, if the machine is broken at line 2004, you

need to write the number 2003 or 2001. The line number of the restart must be smaller than the line number of the broken knife)

 

 

Step 4）Click the “Run From here” button on the Mach3 software interface, and the Z axis of the cnc wood router carving machine quickly moves back to

the position above the input line number 2001.

 

Step 5）Click the “Cycle Start” button on the Mach3 software interface, and the 4 x 8 cnc router will start processing.

 

 

二：After a power failure, the cnc 1325 router 3 axis wood restarts, and the cnc router machine with rotary axis needs to continue working at the breakpoint.

 When both the computer and the automatic cnc router machine are shut down due to power failure, the machine needs to continue carving at the breakpoint.

 

Step 1）Turn on the computer and the 3axis wooden cnc router machine, and let the XYZ axis of the machine return to the mechanical origin.

 

 

Step 2）Mach3 software re-imports the required files.

 

 

Step 3）Manually find the positioning reference point when the file starts processing, and then reset the XYZ axis to zero. (If the

positioning reference point is memorized by the Mach3 software, and the Mach3 software is not closed, there is no need to

reposition)

 

Step 4: You need to estimate the line number where the knife is broken, (for example, if the machine breaks in line 2004, you need

to write the number 2003 or 2001. The line number of the restart must be smaller than the line number where the knife was broken)

 

Step 5: Click the “Run From here” button on the Mach3 software interface, and the Z axis of the machine quickly moves back to the

position above the input line number 2001.

 

 

Step 6: Click the “Cycle Start” button on the Mach3 software interface, and the machine will start processing.

 

 

Note: After the power is cut off and the engraving is continued, there may be slight wrong marks that cannot be eliminated.