Indlela yokugcina umatshini we-laser CO2 yonke imihla?

Nokuba ngabaUmatshini we-laser CO2inokusebenza ngokuzinzileyo kwaye ngokuqhelekileyo ixesha elide ayinakuhlukaniswa nokusebenza okuqhelekileyo kunye nokugcinwa kwemihla ngemihla.

 

一、 Ukugcinwa kwenkqubo yokupholisa amanzi.

 

I-1, Umgangatho wamanzi kunye nobushushu bamanzi ajikelezayo buchaphazela ngqo ubomi benkonzo yombhobho we-laser.Kuyacetyiswa ukuba kusetyenziswe amanzi acocekileyo kwaye ulawule ubushushu bamanzi obungaphantsi kwama-35°C.Kucetyiswa ukuba umsebenzisi akhethe i-chiller.(Shintsha amanzi okupholisa kanye ngeveki ehlotyeni kwaye kanye kwiiveki ezimbini ebusika)

 

2, Ukucoca itanki yamanzi: cima amandla kuqala, ukhuphe umbhobho wokungena kwamanzi, vumela amanzi akwityhubhu yelaser aqukuqelele ngokuzenzekelayo kwitanki yamanzi, vula itanki yamanzi, ukhuphe impompo yamanzi, kwaye ususe ukungcola kwitanki yamanzi. impompo yamanzi.Coca itanki yamanzi, ubeke indawo yamanzi ajikelezayo, ubuyisele impompo yamanzi kwitanki yamanzi, ufake umbhobho wamanzi odibanisa umpompo wamanzi kwindawo yokungena kwamanzi, kwaye ulungelelanise amajoyina.Amandla kwimpompo yamanzi ngokwahlukeneyo kwaye uyiqhube imizuzu emi-2-3 (yenza ityhubhu yelaser izele ngamanzi ajikelezayo)

 

二、 Ukugcinwa kwenkqubo yokususa uthuli

 

Ukusetyenziswa kwexesha elide le-fan kuya kubangela ukuba uthuli oluninzi oluqinileyo luqokelele kwi-fan, eya kwenza ukuba umqhubi avelise ingxolo eninzi, kwaye ayihambisani nokukhupha kunye nokuvumba.Xa ukufunxa kwefeni kunganelanga kwaye nomsi womsi ungagudi, cima amandla kuqala, susa indawo yokungena umoya kunye nemibhobho yokuphuma kwifeni, susa uthuli olungaphakathi, emva koko ujike ifeni ijongise ezantsi, kwaye utsale amaphiko efeni. ngaphakathi ade ahlambuluke., uze ufake ifeni.

 

三、 Ukugcinwa kwenkqubo yamehlo.

 

I-1, Isibuko kunye nesibuko esigxininisekile siya kungcoliswa emva kwexesha lokusetyenziswa, ngakumbi xa kukho umsi omningi kunye nothuli oluvela kwizinto ezikroliweyo zezinto eziphilayo, ngoko kufuneka zicinywe ngexesha.Sula nje ngobunono ngephepha le-lens okanye umqhaphu ofunxayo kunye notywala bezonyango.Kulumkele ukuhlikihla okanye ukudibanisa iilensi ngezinto ezirhabaxa.

 

Qaphela: A. I-lens kufuneka isulwe ngobumnene ngaphandle kokonakalisa i-coat surface.B. Inkqubo yokusula kufuneka iphathwe ngononophelo ukuthintela ukuwa.C. Qinisekisa ukugcina icala le-concave phantsi xa ufaka i-lens yokugxila.

 

I-2, Inkqubo yendlela ye-optical yomatshini wokukrola we-laser igqitywe ngokubonakaliswa kwesibuko kunye nokugxilwa kwesibuko sokugxila.Akukho ngxaki ye-offset yesibuko esigxininise kwindlela ye-optical, kodwa izibuko ezintathu zilungiswe yinxalenye yomatshini, kwaye ithuba lokunciphisa liphezulu.Enkulu, nangona ngokuqhelekileyo kungabikho i-offset, kucetyiswa ukuba ukhangele ukuba indlela ye-optical iyinto eqhelekileyo ngaphambi komsebenzi ngamnye, kwaye emva koko ulungise indlela ye-optical ngexesha.

 

3th, Ityhubhu ye-laser yinxalenye ephambili yomatshini.Xa amagunya ahlukeneyo asetyenziselwa ukuseta imisinga eyahlukeneyo, ikhoyo ngoku iphezulu kakhulu (ngokukhethekileyo ingaphantsi kwe-22ma), eya kunciphisa ubomi benkonzo ye-laser tube.Ngexesha elifanayo, kukulungele ukukhusela umsebenzi wexesha elide kumda wamandla ombane (usebenzisa amandla angaphantsi kwama-80%), ngaphandle koko kuya kukhawulezisa ukucutha ubomi benkonzo yombhobho we-laser.

 

Qaphela: Qinisekisa ukuba ityhubhu yelaser izaliswe ngamanzi ajikelezayo phambi kokuba umatshini usebenze.

 

四, Ukugcinwa kwenkqubo yentshukumo

 

Emva kokuba umatshini uqhube ixesha elide, i-screws kunye ne-couplings kumalungu ahambayo angakhululeka, okuya kuchaphazela ukuzinza kokunyakaza komatshini.Ngoko ke, ngexesha lokusebenza komtshini, kuyimfuneko ukujonga ukuba kukho izandi ezingaqhelekanga okanye izinto ezingaqhelekanga kwiindawo zokuhambisa, kwaye ufumane iingxaki ngexesha.Yomelele kwaye igcinwe.Ngelo xesha, umatshini kufuneka uqinise izikhonkwane nganye nganye ngesixhobo ngexesha elithile.Ukuqina kokuqala kufuneka kube malunga nenyanga emva kokuba isixhobo sisetyenzisiwe.

 

Qinisekisa ukuba ucoce ukungcola kwiireyile zesikhokelo kunye neeracks phambi kokuthambisa okuzenzekelayo, kwaye emva koko uthambise ngokuzenzekelayo iileyili kunye neeracks kanye ngeveki ukunqanda iireyile zesikhokelo kunye neeracks ekugqumeni kunye nokunxiba okunzulu kunye nokwandisa ubomi benkonzo yomatshini (kucetyiswa ukuba sebenzisa kaloliwe oyile 48 # okanye 68 #).

 

Ukugcinwa rhoqo komatshini we-laser akunakugcina kuphela iindleko zezoqoqosho, kodwa nokwandisa ubomi benkonzo yomatshini.Ke ngoko, ukunikela ingqalelo ekugcineni umatshini we-laser ngamaxesha aqhelekileyo kunokubeka isiseko esihle sokusetyenziswa kwixesha elizayo.